FAQ

How do I change the MTU size on the ProxySG?

FAQ ID:    FAQ103
Version:    3.0
Status:    Published
Published date:    03/02/2009
Updated:    08/02/2013
 

Answer

To change the MTU size, please follow the steps below.

1. Login to the Command Line Interface of the ProxySG via SSH, using any familiar SSH client, e.g. Putty or Hyperterminal

2. Once logged in, get into the enable mode, as below and follow the steps.

Blue Coat SG300 Series>enable

Blue Coat SG300 Series#conf t

Blue Coat SG300 Series#(config)interface 0

Blue Coat SG300 Series#(config interface 0)mtu-size <mtu size>

 


Rate this Page

Please take a moment to complete this form to help us better serve you.

Did this document help answer your question?
 
 
If you are finished providing feedback, please click the RATE CONTENT button. Otherwise, please add more detail in the following text box and then click RATE CONTENT.
 
 

Your response will be used to improve our document content.

Ask a Question