FAQ

How can I determine what bootloader version is installed on my PacketShaper from the CLI ?

FAQ ID:    FAQ1076
Version:    1.0
Status:    Published
Published date:    10/03/2010
 

Answer

In order to view the current bootloader information, please use the CLI command "sys info".  See the example below of "sys info" command output.

=======================================================

PacketShaper# sys info
CPU Brand:  GenuineIntel (Pentium Compatible)
CPU Speed:  1201 MHz (measured)
Memory:     511 MB RAM, 120.2MB Flash total, 99.8MB Flash available
Firmware:   EM-8510 Ver.ACA 2006-08-31
Bootloader: M2 Bootloader v7.0
=======================================================


Rate this Page

Please take a moment to complete this form to help us better serve you.

Did this document help answer your question?
 
 
If you are finished providing feedback, please click the RATE CONTENT button. Otherwise, please add more detail in the following text box and then click RATE CONTENT.
 
 

Your response will be used to improve our document content.

Ask a Question