FAQ

How do I check the system uptime in ProxySG using the command line interface (CLI)

FAQ ID:    FAQ1279
Version:    1.0
Status:    Published
Published date:    02/24/2011
 

Answer

To check system uptime using the ProxySG command line interface (CLI):

  1. Login to the ProxySG appliance using a Console/SSH/Telnet connection
  2. Enter Privileged mode using Enable command
    SGOS> enable
  3. Enter the following command at the # prompt:
    show advanced-url /sysinfo/Version

This will show the current version of the ProxySG appliance and the time since it was last rebooted. As this information is being taken from the Sysinfo file, it might take sometime to populate this information.  Here is an example from the CLI running SGOS 6.1.2.1:


ProxySG>enable
Enable Password:
ProxySG#show advanced-url /sysinfo/Version
Blue Coat Systems, Inc., ProxySG Appliance Version Information
Version: SGOS 6.1.2.1
Release id: 54104
UI Version: 6.1.2.1 (54104)
The current time is Tue Mar 8, 2011 23:37:36 GMT (SystemTime 479173056)
The ProxySG Appliance was last hardware rebooted 4 days, 8 hours, 36 minutes, and 32 seconds ago.
The ProxySG Appliance was last software rebooted 4 days, 8 hours, 36 minutes, and 32 seconds ago.
Serial number is XXXXXXXXXX
NIC 0 MAC is 00D08304F884
ProxySG#

 


Rate this Page

Please take a moment to complete this form to help us better serve you.

Did this document help answer your question?
 
 
If you are finished providing feedback, please click the RATE CONTENT button. Otherwise, please add more detail in the following text box and then click RATE CONTENT.
 
 

Your response will be used to improve our document content.

Ask a Question