FAQ

Can you increase the number of threads in BCAAA?

FAQ ID:    FAQ1502
Version:    3.0
Status:    Published
Published date:    08/15/2011
Updated:    01/31/2014
 

Answer

The answer is “yes” however there are some important caveats you should be made aware of first.
In the BCAAA.ini file (by default installed under C:\Program File\/Blue Coat Systems\BCAAA) there is a 'NumThreads' parameter which controls the number of threads BCAAA will create upon startup per realm.
 
BCAAA.ini file:
..
..
; Set number of threads to use; recommended value is 2; if set to 0,
; only a single thread is used.
NumThreads=2
..
..
 
This value can be increased up to 100 however, please be aware this could negatively impact performance, therefore it is recommended is to keep the NumThreads=2 for standard installations.
 
Additionally if the realm in question is an IWA realm, then increasing NumThreads will probably make no difference as Windows limits the number of outstanding authentication requests to 2.
Therefore, increasing NumThreads will not increase the throughput of an IWA realm.
 
Also, increasing the “NumThreads” value is not going to make any difference in a Kerberos deployment.  This setting is normally altered to help reduce the NTLM (netlogon) bottleneck.


Rate this Page

Please take a moment to complete this form to help us better serve you.

Did this document help answer your question?
 
 
If you are finished providing feedback, please click the RATE CONTENT button. Otherwise, please add more detail in the following text box and then click RATE CONTENT.
 
 

Your response will be used to improve our document content.

Ask a Question