FAQ

How do you download the accesslog without using FTP.

FAQ ID:    FAQ1543
Version:    1.0
Status:    Published
Published date:    08/31/2011
 

Answer

It is possible to retrieve the data from an access log.  The access log is stored as a series of zipped objects, you need to download each log object separatly.  Once you have downloaded the objects you then need to delete the entries in the acesslog and the log should upload its content normally.  The following procedure shows how to do this.

1. First browse to Statistics>Advanced>Acess log>Show all access logs>main(or whatever log you are intetested in.) 2.  You will see a series of objects.  Right click on each object and do a download as and save the object.
2. One object will currently be open and you won't be able to download it.  To Get this object do the following.
3 Disable access logging.
4 Restart the proxy(this will make sure that SGOS does not have the file open and you will be able to download the object).
5 Right click on this object and do a download as.
6. At this point you want to delete this access log so that normally access logging will take place.
7 Deleting an accesslog can only be done through the CLI.  So you need to use SSH or the serial interface.
8 The following commands will delete the log entries.

SG510 Series#config t
Enter configuration commands, one per line.  End with CTRL-Z.
SG510 Series#(config)access-log
SG510 Series#(config access-log)edit log main SG510

Series#(config log main)commands delete-logs
  ok
 


Rate this Page

Please take a moment to complete this form to help us better serve you.

Did this document help answer your question?
 
 
If you are finished providing feedback, please click the RATE CONTENT button. Otherwise, please add more detail in the following text box and then click RATE CONTENT.
 
 

Your response will be used to improve our document content.

Ask a Question