How quickly does the ProxySG appliance fail-to-wire in a physically-inline deployment?

FAQ ID:    FAQ1561
Version:    1.0
Status:    Published
Published date:    09/12/2011


There are two main scenarios where the ProxySG appliance enters fail-over mode; each enter fail-over at different rates: 

System Power Loss: When a ProxySG appliance is configured to fail-open and all power is cut from the appliance (e.g. power outage or power cable removal), the built-in hardware relays should go immediately into fail-over mode.

System Hang: If the ProxySG appliance hangs instead of losing power, there might be a short delay (a maximum of 5 seconds) before the hardware bridge goes into fail-over mode. 

Rate this Page

Please take a moment to complete this form to help us better serve you.

Did this document help answer your question?
If you are finished providing feedback, please click the RATE CONTENT button. Otherwise, please add more detail in the following text box and then click RATE CONTENT.

Your response will be used to improve our document content.

Ask a Question