How to create or edit Management console port or services through CLI.
The Management console port or services can be managed through CLI in following manner.
Login into the SG and enter the configure mode
Blue Coat SG210 Series#config terminal
Blue Coat SG210 Series#(config)management-services
Blue Coat SG210 Series#(config management-services)view
This will show the list of existing services, their staus and the ports on which they are running. A sample for HTTPS-Console is shown below.
Service Name: HTTPS-Console
SSL Protocol version: SSLv2v3TLSv1
Cipher Suite: rc4-md5 rc4-sha des-cbc3-sha des-cbc3-md5 rc2-cbc-md5 rc4-64-md5 d
es-cbc-sha des-cbc-md5 exp1024-rc4-md5 exp1024-rc4-sha exp1024-rc2-cbc-md5 exp10
24-des-cbc-sha exp-rc4-md5 exp-rc2-cbc-md5 exp-des-cbc-sha aes128-sha aes256-sha
Destination IP Port Range
<All> 8082 Enabled
Now one can also create new service or delete an existing one.
In order to make changes within a specific service go into the edit mode for that particulare service.
Blue Coat SG210 Series#(config management-services)edit https-console
Here one can define a IP Address/Port that this service will run and enable or disable the service as well.
Blue Coat SG210 Series#(config HTTPS-Console)enable all 8082
At any point in the CLI enter ? to get more help with commands
All this thing can be managed in GUI by going to Configuration > Services > Management Service.
Rate this Page
Please take a moment to complete this form to help us better serve you.