FAQ

How do I setup basic TFTP (Trivial File Transfer Protocol) using the Management Console on the ProxySG appliance?

FAQ ID:    FAQ1589
Version:    2.0
Status:    Published
Published date:    09/28/2011
Updated:    10/20/2011
 

Answer

  Pre-requisites:

 

  •  A TFTP daemon running on the target machine.
  •  Correct configuration of the ProxySG appliance.

 

To configure basic TFTP using the Management Console:

  1. Configure your TFTP daemon on the target machine with the desired folder to be your TFTP directory.i
  2. In your ProxySG Management Console, go to Configuration > Archive > Archive Storage and configure your ProxySG appliance as shown below:

Note: The Host field should have the IP address of the TFTP daemon.
  1. Launch the TFTP daemon on the target machine.
  2. Click Upload in the Remote Upload window.
 

Troubleshooting:

 

Verify the following If you receive the error 'Unable to perform upload'
  1. Check if your TFTP daemon has started.
  2. Verify that your IP information is correctly configured.
  3. Verify network connectivity between the ProxySG appliance and the TFTP appliance.

 


Rate this Page

Please take a moment to complete this form to help us better serve you.

Did this document help answer your question?
 
 
If you are finished providing feedback, please click the RATE CONTENT button. Otherwise, please add more detail in the following text box and then click RATE CONTENT.
 
 

Your response will be used to improve our document content.

Ask a Question