Check Point blocking ADN traffic after upgrade to R70

FAQ ID:    FAQ1602
Version:    1.0
Status:    Published
Published date:    09/30/2011


Question: After upgrading the Check Point FW to R70 the ADN traffic is now being blocked


Answer: Depending on how the FW policy has been defined, Check Point checks protocols on an application level. For example when you define a protocol like HTTP, you could do this based on the tcp port, or based on a higher layer (which is the default for several protocols).

With MACH5, tcp port 80 does not look like HTTP anymore. Result: Check Point will block this traffic. If this is the case at your customer, they have to allow this communication based on tcp ports

Rate this Page

Please take a moment to complete this form to help us better serve you.

Did this document help answer your question?
If you are finished providing feedback, please click the RATE CONTENT button. Otherwise, please add more detail in the following text box and then click RATE CONTENT.

Your response will be used to improve our document content.

Ask a Question