FAQ

How do I configure the ProxySG to communicate with a secure LDAP server?

FAQ ID:    FAQ1691
Version:    1.0
Status:    Published
Published date:    11/01/2011
 

Answer

1. Get the self-signed certificate generated by the secure LDAP server (in a PEM format).

2. Install the self-signed certificate on the ProxySG.

  • Open the management console, select the configuration tab >SSL > CA certificates.
  • Click Import.
  • Provide a name for the new certificate (such as secure_ldap) and paste the certificate details into the text box.  Click OK, then Apply.
  • Next, go to SSL > CA Certificates and click on the CA Certificate lists tab.
  • Edit the 'Browser-trusted' CA certificate list.
  • Add the 'secure_ldap' certificate to the list on the right. Click OK, then Apply.

3. Edit the ‘default’ device profile.

  • Select Configuration > SSL > Device Profiles.
  • Highlight ‘default’ and click Edit.

3. Change the Keyring value from None to Default. Click OK, then Apply.

4. At the LDAP authentication realm.

  • Under the LDAP Servers tab, select the ‘Enable SSL’ check box and make sure that the ‘SSL device profile’ is set to ‘default’.

Rate this Page

Please take a moment to complete this form to help us better serve you.

Did this document help answer your question?
 
 
If you are finished providing feedback, please click the RATE CONTENT button. Otherwise, please add more detail in the following text box and then click RATE CONTENT.
 
 

Your response will be used to improve our document content.

Ask a Question