FAQ

How to make skype or another non-ssl protocol on port 443 to work with transparent proxy with interception enabled for port 443?

FAQ ID:    FAQ1713
Version:    1.0
Status:    Published
Published date:    11/16/2011
 

Answer

1.      Set the proxy configuration / Services / Proxy services / HTTPS / port 443 / Proxy setting as TCP Tunnel, (It must be TCP tunnel, not SSL proxy), Enable Detect protocol, All source IP, All destination IP, port 443, Intercept.

2.      In Proxy Setting / General / Enable TCP Tunnel requests when a protocol error detected. This option only available after SGOS 5.5.

Note as online document or proxy Admin guide:

For the SSL proxy, the Tunnel on Protocol Error option applies when non-SSL traffic arrives at the SSL port (443 by default). A common scenario that causes this is having peer-to-peer applications (viz, Skype, BitTorrent, Gnutella, older AOL-IM and eMule) configured to enable port 443 for peer-to-peer traffic without SSL set as the transport protocol. A ProxySG transparently intercepting all 443 traffic cannot process these connections, rendering the application unusable.


Rate this Page

Please take a moment to complete this form to help us better serve you.

Did this document help answer your question?
 
 
If you are finished providing feedback, please click the RATE CONTENT button. Otherwise, please add more detail in the following text box and then click RATE CONTENT.
 
 

Your response will be used to improve our document content.

Ask a Question