FAQ

How do I find the "side" information of an IP address?

FAQ ID:    FAQ1959
Version:    1.0
Status:    Published
Published date:    02/29/2012
 

Answer

Problem:  I am trying to create a matching rule to classify a host.  I know the host's IP address.  How do I find the "side" information to create the matching rule?

Solution:  The PacketShaper's outside interface should point to the Internet.  Anything between the Packetshaper and the Internet (including the Internet) is considered "outside."  Otherwise, the host is considered "inside."  You can also enter the following CLI commands on the PacketShaper to verify the side.

  1. Type ping x.x.x.x where x.x.x.x is the IP address.
  2. Type hostdb info x.x.x.x where x.x.x.x is the IP address.  In the output, you will see either "I" or "O" next to the IP address.  "I" is inside.  "O" is outside.

 


Rate this Page

Please take a moment to complete this form to help us better serve you.

Did this document help answer your question?
 
 
If you are finished providing feedback, please click the RATE CONTENT button. Otherwise, please add more detail in the following text box and then click RATE CONTENT.
 
 

Your response will be used to improve our document content.

Ask a Question