How can I configure my ProxySG to enable/disable AV scanning based on the Source IP address?

FAQ ID:    FAQ2014
Version:    1.0
Status:    Published
Published date:    03/22/2012


To configure (enable or disable) AV scanning based on the source IP address of a request you must use CPL as shown in the following example:

  1. Access the ProxySG Management Console.
  2. Go to Configuration > Policy > Policy Files.
  3. Select Text Editor from the Install Local File From: drop box and click on Install.
  4. Add the following CPL in the window that displays.

    client.address=x.x.x.x response.icap_service(yes)

 where x.x.x.x is the source IP address and icap_service is the name of the ICAP service configured on the ProxyAV appliance.

Note: The above CPL enables scanning for the specified source IP addresses. Replace "yes" with "no" to disable AV scanning for the specified IP addresses.


Rate this Page

Please take a moment to complete this form to help us better serve you.

Did this document help answer your question?
If you are finished providing feedback, please click the RATE CONTENT button. Otherwise, please add more detail in the following text box and then click RATE CONTENT.

Your response will be used to improve our document content.

Ask a Question