FAQ

Why is PacketShaper showing the message "5V Regulator Status Bad" in the WUI and "Bad bat reg" on the front LCD?

FAQ ID:    FAQ224
Version:    5.0
Status:    Published
Published date:    07/13/2009
Updated:    10/23/2013
 

Answer

Regarding the "5V Regulator Status Bad" and/or "Bad bat reg" message you are encountering on your unit, please see below:

  • This is a cosmetic warning that has no impact on a running unit.
  • The warning simply indicates that the battery has fallen below a certain voltage. 
  • The battery is used to keep the time current when the unit is power cycled or powered off. 
  • A weakened battery will still keep time, but eventually will need to be replaced as it loses power and dies.
  • A unit with a dead battery or no battery at all will still boot and function normally.  The time though will have to be set on the unit at every reboot.    

A unit with a dead battery will still have the correct time when re-booted if a time server (SNTP) is enabled.  Reference: https://bto.bluecoat.com/packetguide/current/reference/cli/setupsntp.htm

If your unit has a hardware support contract, Blue Coat can send you a replacement battery for your unit with written instructions for installation.  Please create a service request online or call Technical Support with the following information.

Name:
Email Address:
Phone Number:
Shipping Address: (We do not ship to P.O. Boxes)
 


Rate this Page

Please take a moment to complete this form to help us better serve you.

Did this document help answer your question?
 
 
If you are finished providing feedback, please click the RATE CONTENT button. Otherwise, please add more detail in the following text box and then click RATE CONTENT.
 
 

Your response will be used to improve our document content.

Ask a Question