NIC-510/810-4xGigE-PT shipped with "failed-closed" bridge configured, how to change it

FAQ ID:    FAQ663
Version:    1.0
Status:    Published
Published date:    12/21/2009


Certain unit of NIC-510/810-4xGigE-PT are being shipped with the bridge configued as "failed-closed". This is usually noticed when the ProxySG is configured inline and when ProxySG lost power and the trunk connection between proxy and the upstream is disconnected as the result of the "failed-closed" settings.

To changed the setting back to "failed-open", we need to change it via CLI

ProxySG#(config) bridge
ProxySG#(config bridge) edit bridge_name
ProxySG#(config bridge bridge_name) mode fail-open

Rate this Page

Please take a moment to complete this form to help us better serve you.

Did this document help answer your question?
If you are finished providing feedback, please click the RATE CONTENT button. Otherwise, please add more detail in the following text box and then click RATE CONTENT.

Your response will be used to improve our document content.

Ask a Question