FAQ

How can I configure my ProxySG to use port 80 instead of 8080 for HTTP

FAQ ID:    FAQ676
Version:    1.0
Status:    Published
Published date:    01/11/2010
 

Answer

By default, the ProxySG will accept explicit connections on port 80 and 8080 for web traffic so chances are that nothing needs to be changed on your configuration for this to work.

To confirm that the Proxy is listening on port 80, follow these steps :

  • Open the web configuration interface and go to Configuration / Services / Proxy Services 
  • In the section called "Standard", you will find a listened named HTTP
  • Edit this service and make sure that in the Listeners section, you see the following listener :
    • Source IP : All
    • Destination IP : All
    • Port range : 80
    • Action : Intercept

With that in place, your proxy will listen and intercept to connections done on port 80. From that point, simply make sure that your browser is configured to use port 80 when communicating with the Proxy (found in your browser's settings).

 

 

 


Rate this Page

Please take a moment to complete this form to help us better serve you.

Did this document help answer your question?
 
 
If you are finished providing feedback, please click the RATE CONTENT button. Otherwise, please add more detail in the following text box and then click RATE CONTENT.
 
 

Your response will be used to improve our document content.

Ask a Question