Solutions

Creating a packet capture filter

Solutions ID:    KB1497
Version:    2.0
Status:    Published
Published date:    03/02/2009
Updated:    05/26/2009
 

Problem Description

Creating a packet capture filter
You want to create a packet capture filter

Resolution

The CLI command '#pcap filter' allows filtering on various attributes to limit the amount of captured packet data collected.

For information about the pcap command and filter parameters, please refer to the Configuration and Management Guide (CMG) for your version of SGOS.  The CMGs are located at https://bto.bluecoat.com/documentation/pubs/ProxySG .

For SGOS 5.x please see Volume 11: Command Line Interface Reference; Chapter 2: Standard and Privileged Mode Commands; # pcap in the CMG.

For SGOS 4.x please see the Command Line Interface Reference, Chapter 2: Standard and Privileged Mode Commands; Privileged Mode Commands; #pcap.


Rate this Page

Please take a moment to complete this form to help us better serve you.

Did this document help answer your question?
 
 
If you are finished providing feedback, please click the RATE CONTENT button. Otherwise, please add more detail in the following text box and then click RATE CONTENT.
 
 

Your response will be used to improve our document content.

Ask a Question