Solutions

What is causing the ERROR 0018 message?

Solutions ID:    KB2139
Version:    2.0
Status:    Published
Published date:    03/02/2009
Updated:    04/28/2009
 

Problem Description

I was using the Command Interpreter (cli.htm) and after I entered the setup showcommand I got an ERROR 0018 message.

Resolution

The Error 0018 happens if someone attempts to use cli.htm while a previous command is in progress (from you or another user). For example, suppose you issue the measure dump command, press cancel on your browser, and then issue another command while PacketShaper is still doing the measure dump operation. You will get the error because PacketShaper's CLI.HTM memory pool is still locked processing the output from the cancelled command.Packeteer suggests using Telnet or console for CLI commands.


Rate this Page

Please take a moment to complete this form to help us better serve you.

Did this document help answer your question?
 
 
If you are finished providing feedback, please click the RATE CONTENT button. Otherwise, please add more detail in the following text box and then click RATE CONTENT.
 
 

Your response will be used to improve our document content.

Ask a Question