Solutions

Which jumpers need to be removed from PS 1700/3500/7500 models in order to disable the bypass?

Solutions ID:    KB2605
Version:    3.0
Status:    Published
Published date:    03/02/2009
Updated:    10/23/2013
 

Problem Description

To implement direct standby operation, you must modify the motherboard to disable the normal bypass relay function of a powered-down PacketShaper. This is done by removing the jumpers.

See Disable Bypass Relays for instructions on removing the jumpers.

Resolution

The PacketShaper 1700, 3500, and 7500 models contain nine jumpers. All nine of these jumpers will need to be removed in order to disable the bypass feature.


Rate this Page

Please take a moment to complete this form to help us better serve you.

Did this document help answer your question?
 
 
If you are finished providing feedback, please click the RATE CONTENT button. Otherwise, please add more detail in the following text box and then click RATE CONTENT.
 
 

Your response will be used to improve our document content.

Ask a Question