Solutions

Restoring the ProxyAV 2000-E to factory default settings

Solutions ID:    KB2867
Version:    1.0
Status:    Published
Published date:    04/02/2009
 

Problem Description

Restoring the ProxyAV 2000-E to factory default settings

Resolution

The button above interface one (1) is the restore to factory defaults button and will restore to factory default settings.  This button is recessed so you will need a pen or similar instrument to depress it.

  1. Make sure your ProxyAV is fully booted.  If you have the two lights on the front of ProxyAV, check the top LED.  It will be illuminated when fully booted.
  2. Depress the button above interface one (1) for at least 10 seconds and then release it.  You will notice that the top LED on the front will go out.  This means that ProxyAV is rebooting which takes approximately two minutes.
  3. When the top LED on the front is illuminated you care ready to go.  The ProxyAV IP will be 10.0.0.2 and the Management IP will be 1.1.1.5.  (NOTE:  The Management IP is no longer needed with ProxyAV 2.2.1.)

Rate this Page

Please take a moment to complete this form to help us better serve you.

Did this document help answer your question?
 
 
If you are finished providing feedback, please click the RATE CONTENT button. Otherwise, please add more detail in the following text box and then click RATE CONTENT.
 
 

Your response will be used to improve our document content.

Ask a Question