Solutions

What ports need to left open for Reporter to work?

Solutions ID:    KB3748
Version:    1.0
Status:    Published
Published date:    03/24/2010
 

Problem Description

 I am seeing failed to bind on port 8082 as a error message when I attempt to bring up Reporter.

The roles page, on version 8.x , will not open.

Using version 8.x I only see the Reporter banner  when going to “Reporter filter.  In other words, I see a blank page on the fitlering screen.

Reporter is crashing, and will not load.

Resolution

Here are some tips to follow when your reporter won't load:

  • For version 8.x, ensure that there is nothing listening on ports 8987 and 8082 before loading Reporter.
  • For version 9.x, ensure there is nothing listening on port 8081.
    • Use netstat -a in a command line to determine this.
    • Note: You can use the following command to find a port on the server:
      •  Netstat – an |find <port#>
      • to find the other port, listen on: Netstat – an|find <port#>.
      • To set this up permanently, use this command on the command line:
        •  Netstat – an 1|find <port#>
  • Ensure Reporter is starting before IIS.
  • ISS (not IIS) security software is known to hold port 8082 open.
  • Mcafee virus software has been known to hold open port 8081.

Note: If all of the above have been validated, the most probable cause of the loading issue is a corupt database. See these articles for more information:

  • For Version 8.x database coruption issues see KB3324
  • For Version 9.x database coruption issues see FAQ415

Rate this Page

Please take a moment to complete this form to help us better serve you.

Did this document help answer your question?
 
 
If you are finished providing feedback, please click the RATE CONTENT button. Otherwise, please add more detail in the following text box and then click RATE CONTENT.
 
 

Your response will be used to improve our document content.

Ask a Question