Proxy SG300 and SG600 report unsupported configuration.
When checking sysinfo, you will see unsupported config due to processor reporting as seen below. This is not on the -20 or above.
Model: 600-10 (unsupported configuration) or Model: 300-10 (unsupported configuration)
RAM: 4096 MB
DIMM 1: 2048 MB SDRAM DDR2
DIMM 2: 2048 MB SDRAM DDR2
Number of CPUs: 1
CPU frequency: 1600 MHz (expecting between 1250 MHz - 1350 MHz)
Bus speed: 200 MHz
Storage: 1 drive
Disk in slot 1: 250 GB (SEAGATE ST9250410AS, rev:0002SDM1, serial:5VG5DQZY)
Disk in slot 2: empty
Interface 0:0: Broadcom Gigabit with no link (MAC 00:d0:83:05:81:65)
Interface 1:0: Broadcom Gigabit running at 100 Mbps full duplex (MAC 00:d0:83:05:81:66)
Interface 1:1: Broadcom Gigabit running at 100 Mbps full duplex (MAC 00:d0:83:05:81:67)
Internal: Cavium Nitrox-Lite Security Processor
This false warning is due to a licensing issue that is being worked on at this time. There is no hardware failure or degradation as this is only a mis reporting of the CPU speed. The CPU is actually a 1600mhz and is working as such. There is not ETA for a fix at this time.
Rate this Page
Please take a moment to complete this form to help us better serve you.