How do I configure the Bloomberg Client to Connect through the ProxySG SOCKS proxy?

Solutions ID:    KB4821
Version:    1.0
Status:    Published
Published date:    12/13/2011

Problem Description

You have a network policy which does not allow client IP to go through the Firewall to the Internet, and you only allow ProxySG/Proxy IP to go through the internet and would like to get the Bloomberg Client to Work via SOCKS Proxy on ProxySG.

You would like to configure Bloomberg Client to go work through the SOCKS Proxy on ProxySG.


Refer to the following Bloomberg guideline on how to configure this on the client

It is presumed that the SOCKS Proxy has been configured on ProxySG, and the policy to allow the traffic has been created.

To selectively allow the Bloomberg client, add a rule for the SOCKS protocol for a destination listed on the Bloomberg host (see below) to the ProxySG Policy (VPM or Local).

The Bloomberg client initiates a SOCKS5 connection to the ProxySG SOCKS Proxy. The Bloomberg client then requests the SOCKS Proxy to create a UDP association which is used by the Bloomberg Client to send the UDP packet to the external host within the *  network with a high port. The Proxy then relays the UDP traffic to the external host and port indicated on the SOCKS UDP associate packet.

The Firewall would need to allow traffic from the Proxy IP to the following list of networks, ports, and protocols. Take note that this list may change, and always refer to the document above which is provided by Bloomberg.

UDP Destination Ports
48129 - 48137

TCP Destination Ports
8194 – 8198
8209 – 8220
8290 – 8294

Destination Hosts

Destination subnets
160. 43.250.0  using the subnet mask of
206.156. 53.0  using the subnet mask of  using the subnet mask of
208. 22. 56.0  using the subnet mask of
208. 22. 57.0  using the subnet mask of  using the subnet mask of

Rate this Page

Please take a moment to complete this form to help us better serve you.

Did this document help answer your question?
If you are finished providing feedback, please click the RATE CONTENT button. Otherwise, please add more detail in the following text box and then click RATE CONTENT.

Your response will be used to improve our document content.

Ask a Question