Solutions

How do I configure the ThreatPulse (cloud) service to bypass certain sites?

Solutions ID:    KB5049
Version:    2.0
Status:    Published
Published date:    04/03/2012
Updated:    04/30/2013
 

Problem Description

I want to the ThreatPulse service to bypass certain sites.

Resolution

Bypass varies by access method.

IPSEC

For IPsec, perform an nslookup on the site and then setup a rule in the firewall/router to bypass the IP address of the site. The traffic to the site will not be placed into the IPsec tunnel.

Client Connector (Windows and Mac)/Explicit

Login to the service and go to Service > Network > Mobility > Bypass IP Address(es) Edit IPs/Subnets > Add Bypass IPs.  Enter the IP address and save the changes.

Proxy Forwarding

Have the proxy bypass the site. If this is an explicit proxy and you are using a proxy PAC file, add the site to the proxy.pac file.  If this is a transparent proxy, add the address to the bypass list so it goes direct.  You might need to change firewall and router rules to allow the clients to go direct to those sites.

 


Rate this Page

Please take a moment to complete this form to help us better serve you.

Did this document help answer your question?
 
 
If you are finished providing feedback, please click the RATE CONTENT button. Otherwise, please add more detail in the following text box and then click RATE CONTENT.
 
 

Your response will be used to improve our document content.

Ask a Question