Solutions

How to configure audit logs for PacketShaper

Solutions ID:    KB5128
Version:    2.0
Status:    Published
Published date:    05/22/2012
Updated:    09/17/2013
 

Problem Description

You can use 3CDaemon or Kiwi Syslog Daemon if  you do not have a syslog server.

Resolution

After you have configured a syslog server, run the following commands on the  PacketShaper to enable audit log being pushed to the syslog server.

#
setup syslog add host:<syslog server IP address> output:13,7
setup syslog state on
#

Examples with syslog server IP address 10.10.10.10:

setup syslog add host:10.10.10.10 output:13,7
setup syslog state on
 

Examples of syslog output:
May 23 08:48:32 10.10.10.111 AUDT-6-Audit: Unit Edited: 175-10014148, logged in via "CLI (touch)"
May 23 08:49:12 10.10.10.111 AUDT-6-Audit: Unit Edited: 175-10014148, Set inbound link to 10000000.
May 23 09:29:39 10.10.10.111 AUDT-6-Audit: Unit Edited: 175-10014148, Reset the class tree and reverted to default tree.
May 23 09:29:45 10.10.10.111 AUDT-6-Audit: Unit Edited: 175-10014148, Cannot load the current configuration configuration from file testing.ldi.

 


Rate this Page

Please take a moment to complete this form to help us better serve you.

Did this document help answer your question?
 
 
If you are finished providing feedback, please click the RATE CONTENT button. Otherwise, please add more detail in the following text box and then click RATE CONTENT.
 
 

Your response will be used to improve our document content.

Ask a Question